|
|
Spark Checkers, KV Meter |
| S-21 Two Wire Spark Checker |
 |
| Handy, economical
spark checker for the little kickers. Care must be taken if used
on high voltage ignition systems, where arcing can occur from
exposed metal on the tester. We recommend the S-48H for CDI
(capacitor discharge ignition) systems. List $26.87 Dealer $21.50 |
| S-48 Eight Wire Spark Checker |
 |
| Highest quality, versatile open-gap spark checker, for 1 to 8 cylinders. This "sparky" can be separated into two 4-wire halves by loosening two wing nuts. Furnished with two ground wires for separate 4-wire use. Sliding mechanism adjusts four gaps which are marked from 1/4 to 1/2 inch as well as in millimeters. Black background for easy visibility is recessed to prevent carbon tracking. Molded Valox is highly resistant to chemical, UV and physical damage. | |
| List $104.00 Dealer $83.20 |
| S-48H Four Wire Spark Checker |
 |
| One half of the S-48 shown above. For those who don't need more than a four-wire spark checker. | |
| List $53.31 Dealer $42.65 |
| 48TA Spark Wire Tip Assemblies List $12.74 Dealer $10.19 |
 |
| Do-it-yourself replacement tips for wire ends on the S-48 and S-48H or other 7mm wires. Easy retro requires a soldering iron and shrink sleeving. Tip is threaded to accept the 48M. One 48TA is a set of four. |
| 48M Metric Spark Wire Adaptor Tips List $3.36 Dealer $2.69 |
| Adapt the standard wire tips on the S-48 & S-48H to the 4mm threaded spark plug terminals. One 48M is a set of four. |
| TA-100 SmarTach+ - digital tachometer/KV meter |
 |
The SmarTach+ from General
Technologies provides RPM readings with no connections required.
Program in the number of cylinders and 2 or 4 cycle, hold the
antenna within a foot or two of the ignition system to read RPM.
Select KV to read voltage on individual spark plug wires, comparing
cylinder to cylinder or engine to engine to find problem ignitions,
wires and spark plugs.
Approx Dim 4.5 x 2.75 x 1 in. List 168.75 Dealer $135.00
|
Updated 21 August 2008
