Phone 847 336 9375    Fax 847 662 6808

111 Greenwood Avenue     Waukegan, IL 60087

e-mail  info@stevensinstrument.com



 

732 Digital Multimeter

The finest high quality DMM we've seen at any price. Solid readings with PVA-1 Peak/DVA Adaptor. Hold feature captures even peak voltage. Reads up to 20 Amps for 30 seconds!  Small package with a big, crisp LCD screen. The quality of this readout exceeds that of any we've seen. Auto-off with warning signal prior to shutdown.
  • DC Volts - 400mV, 4, 40, 400 & 600V, plus auto-range
  • AC Volts - 4, 40 400V plus auto-range
  • DC Current - 400 & 4000 uA, 40 & 400 mA, 10A, 20A for 30 seconds, plus auto-range
  • AC Current - same ranges as DC
  • Continuity - Buzzer under 50 ohms
  • Diode Test 2V Range, 0.01V resolution

Includes 46" test leads, instructions, 9V battery, spare fuses & rubber boot with stand & probe holders.

Approx. dim. w/boot 6.5 x 3.25 x 1.625 in. List $257.62  Dealer $206.10
Multimeter accessories    

 


CT8017 Digital Multimeter
From General Technologies Corporation, a value priced DMM that works well with the optional PVA-1. Note: Inexpensive DMMs are generally not shielded well enough to work with Peak Voltage/DVA adaptors. The CT8017 does the job!
  • Choice of full Auto Ranging or manual range selection
  • 3 3/4 digit display with analog bar graph
  • AC/DC Volts up to 600
  • Manual or auto VDC/VAC selection
  • DC Current measurement up to 10A
  • Resistance measurement up to 32M ohms
  • Display data hold
  • Continuity test with buzzer
  • Diode test
  • Overload protection for Volts & Ohms
  • Fuse protection for Current

Includes 37" test leads, instructions, 2 "AA" batteries, rubber boot with stand & soft carrying pouch.

 
Approx Dim w/boot 6.25 x 3 x 1.75 in;. List $122.50  Dealer $98.00  
Multimeter accessories    

CM600 Amp Clamp
Although this handy little tester reads AC/DC volts plus resistance up to 1000 ohms, we offer it primarily for its ability to easily read AC & DC current up to 600 Amps.

No need to disconnect cables. No need to worry about overloading a meter. Clamp opens up to 1 inch. In tight quarters you can press the hold button, remove the tester and see the reading.

Other features:

  • Audible continuity tests
  • Full autorange features
  • One rotary switch operation
  • Low battery indicator
  • Auto power off
  • Large 4 digit LCD display
  • One touch auto zero
  • Includes test leads, soft carrying case, 2 AAA batteries & user's manual
Approx dim 7.5 x 2.5 x 1 in.

List $164.30     Dealer $131.44

 


AT-101 Analog Volt-Ohmmeter
Troubleshoot electrical and charging circuits of alternator equipped ignitions, electrical and charging circuits of all electric start magneto and CDI systems, battery ignition engines, boat accessory circuits, trailer wiring, general continuity checks, circuit tracing and diode tests.
  • 0-20 DC Volts
  • 0-40 DC Volts
  • High Resistance (1000 ohms center scale)
  • Low Resistance (2.5 ohms center scale)
  • Breaker points open/closed (sensitive scale for use with timing bars)
  • Polarity reverse switch for diode tests
  • Exceptionally readable 5" wide meter
  • 2 standard "C" batteries included
Approx. Dim 7 x 5 x 2.25 in List $326.92  Dealer $261.54  

 

    Updated 26 Dec 2012